Symposium Acoustics - Rollerblock Jr.

(Set of 4 - HDSE (Heavy Duty Special Edition))

Label:	Equipment
Product No.:	I RBJR 4HDSE
Availability:	Back Ordered
Category:	Isolation Devices

$599.00

or Add to Wishlist

Notify Me

This item is Back Ordered and currently unavailable.

Please inform me of any status changes for this product regarding its upcoming availability.

Also available on:
• Isolation Devices
Set of 3
• Isolation Devices
Set of 4
• Isolation Devices
Set of 3 - Tungsten

Description

BEWARE OF COUNTERFEIT ROLLERBLOCKS! Click Here to read more.

Rollerblock Jr. consists of of 8 tops and bottoms and 4 center bearings, to make 4 "Double Stacked" isolator/coupler units. Each top and bottom is constructed of black anodized, aircraft alloy aluminum, and has a 1.875" diameter (4.76 cm) and 5/8" (1.58 cm) thickness. These dimensions were carefully chosen to make Rollerblock Jr. easy to use and set up, yet strong enough to withstand the rigors of use under heavier equipment such as large amplifiers and heavy loudspeakers. The special cup interior has been designed so that the top and bottom "sandwich" is stable with the ball inserted in the center, making for easy setup. The bottom and top are flat and suitable for all equipment chassis, as well as flat surfaces and carpeting.

HDSE stands for "Heavy Duty Special Edition" but it could also stand for "High Definition Special Edition." HDSE is identical in size and form to standard Rollerblock Jr. but has the following enhancements:

1) Top grade 7075 "aircraft" aluminum alloy body
7075 aluminum is harder than some steels and provides superior Brinnelling capacity (resistance to denting and deformation under extremely severe conditions) and superior mechanical coupling over 6061 aluminum.

2) Special "Hard Coat" anodized body and cup area
Hard Coat anodizing provides a thin, precision skin of ceramic hardness which constrained-layer damps the HDSE body, as in Rollerblock Series 2, and also retards wear in the cup area.

3) High precision Grade 10 Tungsten Carbide balls standard
Tungsten Carbide is the best material for use in ball bearing isolation devices; Grade 10 means that each ball meets or exceeds a sphericity and diameter tolerance of 10 parts per million, which is 2.5 times better than the best "off the shelf" ball bearings available. These are the same super-precision balls that are supplied with Series 2+ Rollerblocks, and are only bettered by the Grade 3 Superball (see below).

HDSE was originally developed for use with heavy loudspeakers (HDSE was first introduced in the Symposium Panorama loudspeaker), but offers higher resolution and enhanced bass performance over standard Jr. versions in non-loudspeaker applications such as digital players, analog turntables, preamps, amps, power supplies and conditioners, etc. It is second in performance only to Series 2+ Rollerblocks.

HDSE may also be ordered with State of the Art Grade 3 Superballs for maximum resolution.

"I have during the last year started using Rollerblock Jr. under all of my components except the speakers with very good results. I therefore ordered some more to try under my Watt/Puppy 7 speakers, put a set of three under the Puppy and the result was stunning, more and precise bass – much more in fact – the mid range became so much more natural and bigger, the whole soundtage became much bigger, and I mean BIGGER! The upper range is now as natural as you can expect, this is by far the biggest upgrade I have done for years!" – Tor Jan Nilsen

"…Because the Rollerblocks do such a good job of cleaning up leading edge dynamics and removing edge and overshoot that these artifacts that made the system sound edgy and exciting (as well as loud) are banished…The end result is that the system can be played louder and with less fatigue…it's so much easier to hear into the music. Adding the Rollerblocks to the equation seems to extend the bass rather than simply adding weight, bringing greater texture and clarity to lower register instruments." – Roy Gregory, Hi-Fi+, Issue 45

"The Symposium platforms and Roller Block couplers work in much the same way as the Vertex and Stillpoints supports, but with one interesting wrinkle: they are particularly effective and simple to use under speakers…Once you get used to the fact that even the largest, heaviest speakers can move alarmingly freely in the horizontal plane, you realize that they're actually extremely stable. They also go deeper, are cleaner and far more agile in the bass – so much so that you'll likely need to pull them an inch or so forward from their customary position. The bass improvements simply open out the mid-band, bringing the music vividly to life, making the Symposiums a sonic as well as a practical success." – Roy Gregory, Hi-Fi+, Issue 48