Audience - Au24e High Z MC Phono Cable

Audience believes the Au24 cables attain the elusive goal of combining exquisite sonic detail with the beauty of true musicality. This is due in large part to the Au24’s incredible time domain performance. One look will tell you these are not "me too" products. The materials, design and construction techniques utilized in the Au24 cable line reflect the latest thinking in state of the art, high-resolution technology.

Given the extremely fragile nature of the phono signal, every effort must be pursued in order to preserve the integrity of that signal throughout the signal path. One area where the signal can suffer significant damage and loss is in the phono cable. Cartridge output levels are quite low, typically in the 3-5 millivolt range and often as low as 100 mircovolts. Our use of continuous cast high-purity copper as well as low loss cable geometry preserves the purity of this low level signal. Consumers often choose a phono cable based upon brand recognition alone. However, such a choice can inadvertently compromise a phono playback system due to mismatched impedance characteristics between carridge and cable.

Audience has conducted considerable research into the electrical characteristics of phono cables and has concluded that a single cable cannot possibly serve as an optimal tone arm phono stage interface. The different internal electrical characteristics of phono cartridges make choosing a cable designed to preserve and enhance those characteristics an all important issue. By choosing the wrong cable you can lose precious low level detail information that is essential to overall sonic presentation.

For these reasons, Audience offers vinyl lovers a choice of three impedance-matched phono cables. Each model is designed to carefully optimize the electrical characteristics of hte cartridge to the cable and to preserve signal flow to the phono stage without detrimental influences as follows:

Low Z - for moving coil cartridges with internal resistance up to 30 ohms.

High Z - for moving coil cartridges with internal resistance between 30 and 100 ohms.

MM - for all cartridges with internal resistance above 100 ohms which includes moving coil cartidges rated at 47k ohms and most moving magnet ot moving iron models.

Additionally, the thousands of crystalline barriers present in all conventional copper wire rewuires energy to pass from one barrier to the next. This energy, which is part of the signal becomes lost in this process. When dealing with ultra low level signals, particularly in phono cables, these harmful crystal barriers are significant impediments to the transmittion of critical musical information. For this reason all Audience phono cables are constructed using the highest purity oxygen free continuous cast copper.