Audio Technica - AT-VM95EN Nude Elliptical Stylus, Dual Moving Magnet Cartridge

The VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Features

• VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus

• Aluminum cantilever

• Durable low-resonance polymer housing

• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required

• Compatible with any AT-VMN95 replacement stylus

Cartridge & Stylus
Frequency Response     20-23,000 Hz
Channel Separation     22 (dB at 1 kHz)
Vertical Tracking Angle     23°
Vertical Tracking Force     1.8-2.2 g (2.0 g standard)
Stylus Construction     Nude round shank
Recommended Load Impedance     47,000 ohms
Coil Impedance     3.3 k ohms (1 kHz)
DC Resistance     485 ohms
Coil Inductance     550 mH (1 kHz)
Output Voltage     3.5 mV (1 kHz, 5 cm/sec.)
Output Channel Balance     2.0 dB (1 kHz)
Stylus Shape     0.3 x 0.7 mil elliptical
Cantilever     Aluminum pipe
Static Compliance     20 x 10 – 6 cm / dyne
Dynamic Compliance     7 x 10 – 6 cm / dyne (100 Hz)
Mounting     Half-inch
Cartridge Weight     6.1g
Dimensions     17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Accessories Included     Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Model     AT-VM95EN
Mounting Feature     Half-inch mount
Recommended Load Capacitance     100 to 200 pF
Replacement Stylus     AT-VMN95EN
Stylus Size     0.3 x 0.7 mil
Type     VM Stereo Dual Magnet
Weight     6.1 g (0.22 oz)
Wire Used for Coil     T.P. Copper