Rogue Audio - Cronus Magnum III Tube Integrated Amplifier

 (Silver Finish)



Rogue Audio

Label:

Equipment

Product No.:
M CMAG3S
Availability:
In Stock
Category:

Integrated Amplifiers



$2,995.00

Choose Finish:
or Add to Wishlist

Also available on:
Integrated Amplifiers
Black Finish





Rogue Audio Cronus Magnum III Tube Integrated Amplifer

The new version of the Cronus Magnum features several significant and exciting upgrades along with a new triode/ultralinear switch.

MM/MC Phono Cartridge Compatibility

For vinyl enthusiasts the phono section has been completely redesigned for mm and mc cartridges. Two gain settings provide for 45dB and 60dB of gain so you can now use either high or low output cartridges. The phono also has five individual load settings so you can fine tune the phono for optimal results.

A Triode/Ultralinear switch allows for on the fly switching between Ultralinear operation and pure triode. Ultralinear offers the most power and a commanding grip on the bass while triode provides a slightly softer and more romantic sound. You choose which works best in your setup - maybe both!

RH5-Derived Headphone Amp Circuitry

A completely new headphone circuit is based around MOSFET buffers capable of massive current sourcing. The design is basically a simplified single ended version of our RH-5 headphone amplifier and puts out enough power to drive the most difficult headphones for clean crisp personal audio.

The line stage has been improved and has an amazingly low noise floor for a completely black background for your listening.

Finally, a machined aluminum metal remote completes the upgrade.

Features:

  •  MM/MC phonostage
  •  RH5-derived headphone amp
  •  Ultra-linear/triode switchable
  •  Upgraded linestage circuitry from CM II
  •  Massive high-storage linear PSU
  •  4 and 8 ohm transformer taps
  •  Gold-plated RCA jacks & binding posts
  •  Buffered, variable output (great for subs or bi-amping)
  •  Non-captive IEC power cable (upgradable)
  •  Slow-start turn-on sequence
  •  Built-in bias meter
  •  Fully tested, burned in, and auditioned at Rogue
  •  Machined aluminum remote control
  •  All precision components, build entirely in the USA



Technical Specifications:

  •  Power: 100WPC in linear-mode, 60WPC in triode-mode
  •  Bandwidth: 20Hz-30Khz
  •  Tube Component: 4x KT-120 output tubes, 3x 12AU7 & 2x 12AX7 signal tubes
  •  Phono-section gain: 45dB (MM), 60dB (MC)
  •  Inputs: 3x line-level, 1x phono (RCA)
  •  Outputs: 1x variable, 1x fixed (RCA)
  •  Unit Dimensions: 18"W x 17.5"D x 6.75" H
  •  Shipping Dimensions: 25"W x 22"D x 11" H
  •  Power Requirements: 120V/240V - 50/60Hz


Be the first to write a review for this item OR just rate it