Rogers - LS3/5A Classic Loudspeaker

Rogers LS3/5A Classic Loudspeakers

The LS3/5A Monitor Loudspeaker - This speaker is manufactured under licensed from the British Broadcasting Corporation and is tested in accordance with their specifications

Handcrafted in the UK to traditional BBC specifications, the BBC-licensed Rogers LS3/5A Classic delivers exceptional musical integrity for both music lovers and recording studios.

About Roger British High-Fidelity
Established in North London in 1947 by Jim Rogers, the brand has a rich history of audio excellence:
Pioneered early transistor amplifiers and tuners in the 1960s and 70s.
Introduced the groundbreaking LS3/6 studio monitor in 1970, followed by the legendary LS3/5A.
Developed the original BBC-licensed LS5/9 Grade-one monitor in 1983.
Reintroduced the LS5/9 Classic following the successful 2018 return of the LS3/5A, featuring modern component refinements and an upgraded Audax HD34 tweeter.

We would like to introduce you to a legend, the BBC-licensed Rogers Classic LS3/5A loudspeakers.

If the cabinet is not tuned properly, the sound reproduced will never be correct.
· Critically damped 12mm birch ply enclosure
· Hardwood beech fillets
· Balanced real wood veneers
· Beautiful black Tygan grille
· Walnut and Olive satin finishes as standard
· Other finishes to special order, please ask

Measurements only take you part of the way, because you cannot measure emotion
· Single layer one ounce copper track fiberglass PCB
· M6 laminated transformer cored crossover inductors
· M6 laminated transformer cored auto transformer
  (for tweeter level matching)
· High voltage Metalized capacitors
· All components hand soldered with silver solder

Sometimes what you cannot see, is just as important as what you can
· Mylar dome tweeter with kraft nomex voice coil former
· Doped Bextrene cone bass unit
· Hand-finished and painstakingly pair matched in the UK at Rogers
· Each pair's measurements are archived by serial number to ensure precise driver replacement if needed

The smallest of details don’t make a small difference, they make all the difference
· Single wire, 4mm multi-contact sockets
· Sockets are silver plated for the best connection
· Choice of beautiful real-wood book-matched veneers
· Finishes: rosewood, walnut and olive
· Handmade by master-craftsman


Optional Matching Stands
Partnered with the optional matching Panzerholz stand, the LS3/5A loudspeaker transcends logical expectation of what is possible with a two-way transducer speaker system, ultimately sounding more like that of a high-quality point source panel speaker.

Note: Rogers stands sold separately.

Rogers LS3/5A Classic Specifications:

System Type: Two-way infinite baffle
Frequency Response: 80Hz-20kHz +/- 3dB
Bass/midrange: 110mm Bextrene cone
Tweeter: 19mm Mylar dome
Crossover Frequency: 3KHz
Sensitivity: 82.5dB/W/M
Nominal Impedance: 15ohms
Recommended Amplifier Range: 30-80 Watts (Unclipped - Not to exceed any amplifier range as damage may result)
Cabinet: Cabinet 12mm Birch ply critically damped
Grille: Black Tygan
Standard Satin Finish: Walnut and Olive
Connections: Stereo pair 4mm banana sockets
Dimensions (H,W,D): 12"x 7.5"x 6.5" w/grill
Weight each: 10.8 lbs.
BBC-licensed

+ LS Speaker Stands sold separately