Music Hall Audio - Ikura Turntable With Ortofon 2M Blue

 (Black)



Music Hall Audio

Label:

Equipment

Product No.:
T IKURA B
Availability:
In Stock
Category:

Turntables



$1,195.00

or Add to Wishlist

Also available on:
Turntables
White





Music Hall Ikura Turntable

For the first time, music hall collaborated with an outside industrial design firm to develop and complete the project. The foundation of ikura’s design remains the unique two-piece split-plinth design originated by music hall and the final product is the result of a dynamic design partnership between Doing & Done, headed by designer James Kyroudis, and music hall.

The mdf (medium density fiberboard) platter and felt mat sit on a high quality, stainless steel ball bearing sheathed in Teflon providing fluid and noise-free operation. The bearing assembly comes pre-charged with lubricant.

The effective length of the tonearm is nine inches. This allows for a very shallow tracking arc on the record thus reducing distortion and record wear. The tonearm comes mounted with a high quality moving magnet cartridge and features Swiss made ABEC 7 stainless steel bearings.

Each element of the ikura was carefully selected to provide you with the highest level of performance and sound quality. Used properly, the ikura will provide you with years of musical enjoyment.

Features:

  • music hall’s unique split-plinth design
  • gorgeous high gloss white or black finish
  • top tier one piece alloy tonearm
  • flexible internal tonearm wire drawn from high purity copper
  • counterweight’s center of gravity is level with the stylus tip
  • resonance damping counterweight is decoupled from the tonearm
  • separately isolated dc synchronous motor
  • two speed (33/45 rpm) pulley
  • ortofon 2m blue moving magnet cartridge with user replaceable
  • nude elliptical diamond stylus (a $225 value)
  • cartridge supplied is mounted and properly aligned
  • precision stainless steel main bearing sheathed in teflon
  • main bearing provides noise free fluid operation
  • dynamically balanced MDF platter
  • soft felt mat
  • high quality gold rca connectors and detachable phono cable
  • special vibration damping adjustable feet
  • low noise fully manual belt drive design
  • excellent instruction manual and easy assembly
  • dust cover and 45rpm adaptor
  • not compatible with music hall cruise control



Music Hall Ikura Specifications:

  •     Power Supply: 115V/60Hz or 230V/50Hz
  •     Power Absorption: 2VA
  •     Motor: DC synchronous
  •     Speeds: 33 1/3rpm (manual change to 45 rpm)
  •     Speed deviation: ± 0.9%
  •     Wow and flutter: ±0.15 %
  •     Rumble Max: >-70 db
  •     Mounting distance arm base: 212mm
  •     Armtube material: aluminium
  •     Effective tonearm length: 9 in (228.6mm)
  •     Effective tonearm mass: 11g
  •     Overhang: 71 inch (18mm)
  •     Cartridge weights: 2.0–16.0g
  •     Tonearm weight w/o counterweight: 250g
  •     Platter diameter: 11.81 in (30cm)
  •     Platter weight: 2 lbs (.90kg)
  •     Dimensions: (W x D x Hw/dust cover closed) 18.25 x 13.25 x 5.5 in (46.4 x 33.7 x 14 cm)
  •     Weight (including pkg.): 20lbs (9.07 kg)

Ortofon 2M Blue MM Cartridge Specifications:

  •     Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
  •     Channel balance at 1 kHz: 1.5 dB
  •     Channel separation at 1 kHz: 25 dB
  •     Channel separation at 15 kHz: 15 dB
  •     Frequency range at - 3dB: 20-25.000 Hz
  •     Frequency response: 20-20.000 Hz + 2 / - 1 dB
  •     Tracking ability at 315Hz at recommended tracking force: 80 µm
  •     Compliance, dynamic, lateral: 20 µm/mN
  •     Stylus type: Nude Elliptical
  •     Stylus tip radius: r/R 8/18 µm
  •     Tracking force range: 1.6-2.0g (16-20 mN)
  •     Tracking force, recommended: 1.8 g (18 mN)
  •     Tracking angle: 20°
  •     Internal impedance, DC resistance: 1.3 kOhm
  •     Internal inductance: 700 mH
  •     Recommended load resistance: 47 kOhm
  •     Recommended load capacitance: 150-300 pF
  •     Cartridge colour, body/stylus: Black/Blue
  •     Cartridge weight: 7.2 g
  •     Replacement stylus unit
  •     Stylus protection guard


Be the first to write a review for this item OR just rate it