Spendor - Spendor SP1/2R2 Classic Stereo Speakers

 (Dark Walnut Finish/ PAIR)



Spendor

Label:

Equipment

Product No.:
K SP1 2R2W
Availability:
Special Order
Category:

Speakers



$6,895.00

or Add to Wishlist

Also available on:
Speakers
Cherry Finish/ PAIR





The Spendor Classic Series is a range of stand-mounted loudspeakers which has been developed from the experience of over 30 years of Spendor heritage and experience.


Whilst there have been constant advances and refinements to the original technology used in the first Spendor products, the attention to fine detail remains and is embodied in the award winning Classic Series products.


The Latest 'R²' series classic speakers combine all the advantages in materials technology that have been developed for the new Spendor speakers, but retain the traditional styling and sound balance one would expect from these monitor grade loudspeakers.


The Spendor SP1/2R² offers a unique blend of audio quality, tonal accuracy, razor sharp stereo precision and craftsmanship. A product derived from many years of development in drive units, crossovers and cabinetry. A speaker which wears it's heritage with pride.


Directly descended from the much praised and critically acclaimed Spendor BC1, the SP1/2R² maintains the former's dimensions and uncanny mid and upper range accuracy at far higher sound pressure levels, with increased sensitivity, closer control of bass frequencies and lower mid-band colouration.


It effortlessly meets the challenge set by infinitely variable listening conditions and offers consistent, faithful and neutral sound reproduction.

Features:

  • Spendor 21cm drive unit with phase correction design
  • Copper shielded midrange pole for low distortion
  • High grade crossover network with gold conductors
  • Silver plated pure copper internal cables throughout
  • Gold plated binding posts on the rear
  • Temperature stabilised rubberised cabinet damping pads
  • Classic thin-wall design to reference standards 



  • Description:   3-way stand mounting loudspeaker
  • Enclosure type:   Reflex
  • SHF drive unit:   22mm wide-surround dome with fluid cooling
  • HF drive unit:   38mm soft dome with copper shaded pole
  • LF drive unit:   Spendor 210mm polymer cone
  • Sensitivity:   88dB for 1 watt at 1 metre
  • Crossover point:   2.8 kHz, 13 kHz
  • Frequency response:   55 Hz to 20 kHz ± 3dB anechoic
  • Typical in-room response:   -6dB at 45 Hz
  • Impedance:   8 ohms nominal
  • Impedance minimum:   7 ohms
  • Power handling:   150 watts unclipped programme
  • Terminals:   Gold 2/3 way binding posts bi-wired
  • Cabinet (HxWxD):   635 x 300 x 300mm
  • Finish:   cherry (dark walnut to special order)
  • Weight:   18 kg each
  • Stand height:   400-500mm (not supplied)



Be the first to write a review for this item OR just rate it