Parasound - Zphono XRM Phono Preamplifier



Parasound

Label:

Equipment

Product No.:
M ZPHONOXRM
Availability:
In Stock
Category:

Phono Pre Amps



$599.00

or Add to Wishlist





Features:

  • Dual inputs for two turntables (1 MM & 1 MC)
  • Front panel input select switch
  • Front panel mono/stereo mode switch
  • Front panel rumble filter switch
  • Balanced and unbalanced outputs
  • Variable MC impedance adjustment of 50-1050 ohms
  • MM Gain options of 40 dB or 50 dB unbalanced (46 dB/56 dB balanced)
  • MC Gain options of 50 dB or 60 dB unbalanced (56 dB/66 dB balanced)
  • RIAA accurate to within 0.2 dB
  • Ultra-low distortion (<0.02% THD)
  • Ultra high-speed, low-noise opamps
  • Audiophile grade resistors and capacitors
  • Gold-plated RCA input and output jacks
  • Unique half-rack width chassis; 1 rack space high




Specifications:

Frequency Response
20-20 kHz, +/- 0.2 dB

Total Harmonic Distortion
0.02% at 1 kHz

Signal to Noise Ratio, MM 40 dB Setting
> 94 dB, input shorted, IHF A-weighted
> 90 dB, input shorted, unweighted

Signal to Noise Ratio, MM 50 dB Setting
> 94 dB, input shorted, IHF A-weighted
> 90 dB, input shorted, unweighted

Signal to Noise Ratio, MC 50 dB Setting
> 92 dB, input shorted, IHF A-weighted
> 88 dB, input shorted, unweighted

Signal to Noise Ratio, MC 60 dB Setting
> 82 dB, input shorted, IHF A-weighted
> 80 dB, input shorted, unweighted

Inter-channel Crosstalk
> 80 dB at 1 kHz

Input Impedance
MM: 47k Ω
MC: 50-1050 Ω

Output Impedance
Unbalanced: 150 Ω
Balanced: 150 Ω per leg

Input Sensitivity at 1 kHz, 4mV Input
40 dB: 5 mV for 500mV output
50 dB: 5 mV for 1.5 Volts output
60 dB: 5 mV for 3 Volts output

Input Sensitivity at 1 kHz, 1V Output
40 dB: 10 mV for 1.0 Volt output
50 dB: 3.5 mV for 1.0 Volt output
60 dB: 1.8 mV for 1.0 Volt output

Total Gain
40 dB / 50 dB / 60 dB (unbalanced output)
46 dB / 56 dB / 66 dB (balanced output)

Rumble Filter
40 Hz high pass, 18 dB /oct.

AC Power Requirement
Standby: 0 watts
Power On: 7 watts
115 VAC or 230 VAC 50 - 60 Hz
(Selected on bottom)

Dimensions
Width: 8.5" (220 mm)
Depth: 10" (254 mm)
Depth: 12" (305 mm) - cables connected
Height, with feet: 2" (51 mm)
Height, without feet: 1.75" (45 mm), 1U

Weight
Net: 3.9 lbs. (1.8kg)
Shipping: 6.8 lbs. (3.1 kg)



Be the first to write a review for this item OR just rate it