SME - SME Series 310 Tonearm




Product No.:
T SME310


Also available on:
Silver with Black Print

Series 300 Tonearm

The Series 300 broadens the application of SME technology.
One piece magnesium tone arm, available as Model 309 and Model 310.
The detachable magnesium headshell has a new style coupling, providing the convenience of rapid cartridge interchange without loss of rigidity.
Our designers can be justly proud of these models which offer a performance and manufacturing excellence unmatched by many more expensive models.

  • Unique pressure die-cast magnesium shell detachable and interchangeable without disturbing cartridge or wiring.
  • New design clamping arrangement ensures rigid junction with tone-arm.
  • Internal constrained layer damps minute residual vibrations making tone-arm acoustically inert.
  • Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on 10mm precision ball races. Axis at record mean level to minimise warp-wow.
  • Unique assembly gives high rigidity and allows bearings to be critically adjusted before tone-arm is fitted.
  • Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
  • 23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm precision ball races, widely spaced to resist tilt.
  • Anti-skate control operates through tension spring and filament. Dial corresponds with VTF and has positive OFF position.
  • Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
  • Dual-lock base provides movement control with high rigidity.
  • Tungsten-alloy balance weight carried on damped two-point suspension. Extra-low inertia design assists warp riding.
  • Underslung weight housing corrects centre of gravity and provides non reflective tone-arm termination.
  • Swivelling, damped output socket minimises vibration transmission in sub-chassis use.
  • Reference lines on tone-arm facilitate VTA setting.
  • Fine adjustment of horizontal tracking angle (HTA).
  • New design alignment protractor sets HTA with great accuracy.
  • Internal wiring in silver litz.
  • Balanced audio lead with gold plated phono plugs.



Series 310 Dimensions
A - Distance from pivot to stylus   238.50mm
B - Distance from pivot to turntable centre   222.0mm
C - Cartridge fixing centres   12.70mm
D - Offset angle   22.569°
E - Linear offset   91.54mm
F - Overhang   16.50mm
G - Height above mounting surface   87.90mm max
56.40mm min
H - Height of record surface above mounting surface   55.90mm max
24.40mm min
J - Depth below mounting surface   56.75mm
K - Radial clearance for balance weight   73.0mm
L - Clearance between cabinet lid and record surface, assuming cartridge height at 17.0mm   37.0mm
Series 310 Specifications  
Effective mass   9.7g
Cartridge balance   6 - 17g
Vertical tracking force   0 - 3g
Maximum tracking error   0.013°/mm
Net weight   720.0g
Pivot-stylus distance   238.5mm
Pivot-sindle centre distance   220.0mm
Audio lead   1.2m

Be the first to write a review for this item OR just rate it