AMG - Teatro Low Output Moving Coil Phono Cartridge



AMG

Label:

Equipment

Product No.:
T AMGTEATRO
Availability:
In Stock
Category:

Low Output Cartridges



All Sales Final on This Item
$2,750.00

or Add to Wishlist




Stereophile - 2017 500 Recommended Components

The AMG Teatro moving-coil phono cartridge represents the cumulative work of the AMG design team and an international group of manufacturers. Its moving-coil phono cartridge features a titanium body and Boron cantilever, providing excellent clarity in playback with balanced lows and airy highs.

The AMG Teatro moving-coil phono cartridge represents the cumulative work of the AMG design team and an international group of manufacturers. The Teatro’s special 2-piece titanium body provides a superior strength-to-weight ratio and is dimensioned to minimize resonance and reflected energy. Its internal construction is radiused and includes a fixture for rigid mounting of the MC generator. The generator is an extremely efficient electro-mechanical design, using separate coils for each channel for superior channel separation. The coils are wound with Ohno cast (OCC) mono-crystal high-purity oxygen-free copper wire. Neodymium magnets are combined with a special soft magnetic alloy yoke consisting of cobalt and iron to produce an output of .4mV at 5cm/sec. Coil impedance is 12Ω allowing the use of many  phono stages and step-up devices. A solid boron cantilever with a diameter of .26mm is fit with a line contact stylus (40 x 7µm) and the dynamic compliance is 18 x 10-6 cm/dyne for enhanced tracking. The Tiodize Type III titanium body is tapped for 2.5mm mounting screws and the output pins are also PC-OCC
(Pure Copper Ohno Continuous Casting).




Body: Titanium 6Al4vEli, Tiodized Type III, tapped for 2.5mm
mounting hardware, ½” spacing
Generator: Separate coils per channel (V type), wound with Ohno cast (OCC)
mono-crystal high-purity oxygen-free copper wire. Neodymium magnets,
special, soft magnetic alloy yoke
Stylus Guard: Machined aluminum from solid billet
Cantilever: Solid Boron, .26mm diameter, Stylus: 40 x 7µm Line contact (Ogura)
Output Voltage: 0.4mV (1kHz @ 5cm/sec.)
Tracking Force: 1.8 – 2.2 grams (2.0 optimal)
Internal Coil Resistance: 12Ω
Recommended Resistive Loading Range: 120 Ω – 47k Ω,
(120 – 500Ω optimal range)
Dynamic Compliance: 18 x 10-6 cm/dyne, Static Compliance: 35 x 10-6 cm/dyne
Weight: 10.95 grams



Be the first to write a review for this item OR just rate it